38
2-2 Starting Printing
Chapter 2 Printing
Raise the vise binder.
When raising or lowering the binder, be sure to hold its handle.
Place the instrument to be imprinted on the table of the vise and lower the binder.
Follow the instructions below and determine the position of the instrument.
The area to be imprinted must be within the resin sheet on the table.
The area to be imprinted must be 10 mm (0.39 in.) or more away from the outline of
the binder.
The instrument must be secured in a manner that you cannot easily move it.
Binder
Handle
To Next Page
Loading...
