Roland RD-800 - Playing Audio Files from USB Flash Drive; Changing Audio File Playback Settings; Managing Audio Files

25
Modulation FX Parameters
43: OD " CHORUS
L in
R in
Chorus
Overdrive
L out
R out
Balance W
Balance W
Balance D
Balance D
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Depth Knob
OVERDRIVE
DRIVE,
OVERDRIVE PAN,
CHORUS RATE,
CHORUS
BALANCE
Species the parameter that is
controlled by the MODULATION FX
[DEPTH] knob.
Rate Knob
Species the parameter that is
controlled by the MODULATION FX
[RATE] knob.
Overdrive
Drive #
0–127
Degree of distortion
Also changes the volume.
Overdrive Pan # L64–63R Stereo location of the overdrive sound
Chorus Pre Delay 0.0–100.0 [msec]
Adjusts the delay time from the direct
sound until the chorus sound is heard.
Chorus Rate
(sync sw) #
OFF, ON
If this is ON, the modulation is
synchronized to the tempo of the
rhythm (owner’s manual p. 24).
Chorus Rate
(Hz) #/
Chorus Rate
(note) #
0.05–10.00 [Hz]
Frequency of modulation
note (p. 31)
Chorus Depth 0–127 Depth of modulation
Chorus Balance #
D100:0W–
D0:100W
Adjusts the volume balance between
the sound that is sent through the
chorus (W) and the sound that is not
sent through the chorus (D).
Level 0–127 Output Level
44: OD " FLANGER
L in
R in
Flanger
Overdrive
L out
R out
Balance W
Balance W
Balance D
Balance D
Feedback
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Depth Knob
OVERDRIVE
DRIVE,
OVERDRIVE PAN,
FLN RATE,
FLN FEEDBACK,
FLN BALANCE
Species the parameter that is
controlled by the MODULATION FX
[DEPTH] knob.
Rate Knob
Species the parameter that is
controlled by the MODULATION FX
[RATE] knob.
Overdrive
Drive #
0–127
Degree of distortion
Also changes the volume.
Overdrive Pan # L64–63R Stereo location of the overdrive sound
Flanger Pre
Delay
0.0–100 [msec]
Adjusts the delay time from the direct
sound until the anger sound is heard.
Flanger Rate
(sync sw) #
OFF, ON
If this is ON, the modulation is
synchronized to the tempo of the
rhythm (owner’s manual p. 24).
Flanger Rate
(Hz) #/
Flanger Rate
(note) #
0.05–10.00 [Hz]
Frequency of modulation
note (p. 31)
Flanger Depth 0–127 Depth of modulation
Flanger
Feedback #
-98–+98 [%]
Adjusts the proportion of the anger
sound that is fed back into the eect.
Negative “-” settings will invert the
phase.
Flanger Balance
#
D100:0W–
D0:100W
Adjusts the volume balance between
the sound that is sent through the
anger (W) and the sound that is not
sent through the anger (D).
Level 0–127 Output Level