Roland SUPER JX - Manual Mode

32
To see the name or the value of the parameter
which you are now editing, do as follows.
@ Push the TONE of the Edit Buttons.
The Display will respond with:
Abbreviation Tone Number to be edited
of the Vocie
Memory mode
and Patch
Number
@ Edit with the PG-800.
The parameter name and its value are shown in
the Display.
MANUAL MODE
The JX-10 features Manual mode in which the
whole panel setting of the programmer decides
the Tone. That is, now existing Tone written in
memory has nothing to do with your sound syn-
thesis. To turn the JX-10 to this mode, simply
push the Manua! Button on the PG-800.
*\f there is no change by moving the knob or
switch on the programmer, it is becuase the
Position you have set is exactly the same as the
preprogrammed. If it happens, just ignore it and
move to the next procedure.
* It may be quicker and easier to select a Tone that
is similar to the one you want to synthesize, then
modify it.