Roland SUPER JX - Copying a Patch Memory

&
b. Copying a Patch Memory
The JX-10 allows to copy only one Patch Memory
onto the Memory Cartridge or load one Patch
Memory from the Cartridge memory to the inter-
nal memory.
1) Saving a single Patch Memory onto the
Cartridge
@ Set the Protect Switch on the Memory Car-
tridge to the OFF position.
@ Set the Voice Memory Switch @to the INT
pasition.
@® Call the Patch Memory to be saved onto the
Cartridge.
@® Push the Write Button @.
The Display will respond with:
a
r
=I
mM
=
m3
~ 3
se 3E
m U
RR ORR K's
A B
A: internal or Cartridge
B: Bank and Number of the
Patch Memory currentiy
selected
© Set the Voice Memory Switch to the CART
position.
@ Using the Patch Memory Buttons, @ assign the
Bank and the Number of the Patch Memory
that is to be the new location for the Patch
Memory you have selected in the step @.
Push the Enter Key.
@® Return the Protect Switch on the Memory Car-
tridge to the ON position.
49