Roland SUPER JX - Page 37

Parameter
CHORUS
Chorus Mode
LFO (Low Frequency Oscillator)
Parameter
“baou
if CFG Wi
Data
hime] Display] Value
> cn
WoL G3 be Cz
zs)
a)
4a —
talca to] 2
Lo] ta
co a)
Function
Programmer
This is to selact whether to control the VCA by the
signal from the ENV-2 ( “\ } or by the Gate
signal ( FL }.
This parameter determines the sensitivity of the Key
Touch (Dynamics effect). (Note 1)
OFF: Chorus is off
1: Expansive Chorus effect is obtained.
2: Rich Chorus effect is obtained.
This oscillator generates extremely low frequency,
so produces a vibrato or growl effect by controlling
the DCO or VCF.
Function
This is for selecting the LFO output waveform.
mM
SINE: % (Sine Wave)
QuA: TL (Square Wave)
RAND: Random
This sets the time needed for the modulation by the
LFO to start.
A
This sets the rate (frequency) of the LFO.
La }e
Programmer
37