27
How to Use
Use the corresponding knob ([INPUT 1 (MIC)], [INPUT 2 (GUITAR)], or [INPUT 3 (AUX)]) to adjust the
volume of the microphone, guitar, or audio device so its PEAK indicator does not light.
Features of the “ALL INPUT” Mode
• Microphone or guitar sound is localized at the center.
• If you record audio device sound only, do not connect any equipment to the INPUT 1 (MIC) or INPUT
2 (GUITAR) jack, and turn the [INPUT 1 (MIC)] and [INPUT 2 (GUITAR)] knobs fully to the left.
• In “ALL INPUT” mode, you cannot record audio data played on the computer.
To record audio data played on the computer, set the [REC MODE] button to “LOOP BACK.”
• When recording, sound from the microphone, guitar, and audio device is mixed together. You
cannot edit the recorded audio data separately.
Examples of How to Use the ”ALL INPUT” Mode
• Recording the guitar sound while playing a Minus One CD
• Singing with the karaoke sound of an audio device, and recording the vocal and karaoke
sound
• Recording vocal or guitar sound with a synthesizer
• Recording voice-over for a TV or video game, using a microphone
To Next Page
Loading...
Need help?
General
