26
How to Use
Recording Microphone or Guitar Sound Along with Audio
Device Sound (ALL INPUTS)
When you set the recording mode to “ALL INPUT,” you can record microphone and/or guitar sound in
combination with the stereo sound of an audio device.
Select the “ALL INPUT” mode when recording microphone or guitar sound with the stereo playback
of the audio device.
Computer
Amplied speakersHeadphones
When connecting
a condenser
microphone, set the
[PHANTOM] button to
“48V.”
Make sure that the
[PHANTOM] button
is set to “OFF” when
connecting a dynamic
microphone that does
not require phantom
power (p. 10).
When
connecting a
guitar or bass, set
the [Hi-Z] button
to “ON” (p. 10).
Audio device
Rear panel
Set the input port for the track in the software.
When using SONAR, set to “Stereo IN (TRI-CAPTURE).”
To Next Page
Loading...
Need help?
General
