Roland TrueVIS VG-540 User Manual

Thank you very much for purchasing this product.
 To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read
through this manual completely and store it in a safe location.
 Unauthorized copying or transferral, in whole or in part, of this manual is prohibited.
 The contents of this manual and the specications of this product are subject to change without notice.
 This manual and the product have been prepared and tested as much as possible. If you nd any misprints or
errors, please inform Roland DG Corp.
 Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage that may occur through use
of this product, regardless of any failure to perform on the part of this product.
 Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage that may occur with respect
to any article made using this product.
R2-160322
Setup Guide

Roland TrueVIS VG-540 Specifications

General

Cutting Function	Integrated contour cutting
Print Technology	Piezo inkjet
Max Print Width	54 inches
Resolution	Maximum 1200 dpi
Media Handling	Roll-fed
Ink Configuration	Cyan, Magenta, Yellow, Black, Light Cyan, Light Magenta
Connectivity	Ethernet
Media Thickness	Maximum 1.0 mm with liner
Ink Droplet Size	Variable droplet technology
Operating System Compatibility	Windows 7, Windows 8/8.1, Windows 10
Power Requirements	AC 100 to 240 V ± 10%, 50/60 Hz