3. Assembly and Ink Filling
8
G
Lightly tighten the bolts in the order of
1
,
2
.
Use a washer for each bolt.
Tighten
temporarily
Bolts: 6
Washers: 6
H
Fully tighten the bolts in the order of
1
,
2
.
Before tightening the bolts, check once more that the 2 stand legs are parallel. If the inside of the stand
stay is touching the L-shaped brackets and the stand legs, the stand legs will be parallel.
When tightening the bolts fully, tighten them securely. Loose bolts may cause the stand to wobble.
Tighten fully
Bolts: 6
Washers: 6
To Next Page
Loading...
