Roland V-combo VR-09 - Specifying the Low-Frequency Boost;Cut (Organ Low Gain); (Organ High Gain); Selecting the Type of Rotary Efect (Rotary Type); (Woofer Accel)

Detailed Settings for All Functions (Menu)
43
Category Parameter Value Explanation
Organ
Organ Low Gain
Specifying the Low-frequency Boost/Cut (Organ Low Gain)
This species the amount of boost/cut for the low-frequency region.
-12–12
Organ High Gain
Specifying the High-frequency Boost/Cut (Organ High Gain)
This species the amount of boost/cut for the high-frequency region.
-12–12
Rotary
Rotary Type
Selecting the Type of Rotary Eect (Rotary Type)
This selects the type of rotary eect.
TYPE1 This eect provides a mild sense of rotation with an extended high range.
TYPE2 This eect provides a dynamic sense of rotation with a powerful low range.
Woofer Accel
Specifying the Rotational Acceleration of the Woofer (Woofer
Accel)
This species the rate at which the woofer’s rotation will change when you switch speeds.
1–16
Tweeter Accel
Specifying the Rotational Acceleration of the Tweeter (Tweeter
Accel)
This species the rate at which the tweeter’s rotation will change when you switch speeds.
1–16
Wf Slow Speed
Specifying the Woofer’s Slow Rotation Speed (Wf Slow Speed)
This species the rotational speed of the woofer at slow speed.
0–127
Tw Slow Speed
Specifying the Tweeter’s Slow Rotation Speed (Tw Slow Speed)
This species the rotational speed of the tweeter at slow speed.
0–127
Wf Fast Speed
Specifying the Woofer’s Fast Rotation Speed (Wf Fast Speed)
This species the rotational speed of the woofer at fast speed.
0–127
Tw Fast Speed
Specifying the Tweeter’s Fast Rotation Speed (Tw Fast Speed)
This species the rotational speed of the tweeter at fast speed.
0–127
For details about how to make menu
settings, see p. 42.
Introduction Performing Recording Looper Settings
Appendix