Roland V-combo VR-09 - Stored Settings; Settings That Are Stored After the Power Is Turned Off; Settings That Are Stored in the Registrations

59
Setting Explanation Page
— Sound variation p. 12
— Registration name p. 15
—
[TRANSPOSE] button setting (keyboard
transpose setting)
p. 26
—
ROTARY [FAST/SLOW] button on/o
status
p. 19
—
ROTARY SOUND [ON/OFF] button on/
o status
p. 19
— Percussion setting p. 20
— Vibrato eect / chorus eect settings p. 21
— Dual/split setting p. 27
— Split point setting p. 31
— Harmonic bar settings p. 16
— Synthesizer sound settings p. 22
—
LEVEL [
] [ ] button and [LEVEL] bar
settings (volume of each section)
—
— Octave settings of each part p. 26
— Eect settings p. 23
— Rhythm pattern type p. 32
— Tempo setting p. 32
— Rhythm pattern volume p. 32
— D-BEAM controller button setting p. 24
Vibrato/Chorus Part
Parts aected by vibrato and chorus
eects
p. 42
Leakage Level Leakage noise amount p. 42
On Click Level
Key-on click volume p. 42
O Click Level
Key-o click volume p. 42
Organ Low Gain Amount of low-frequency boost/cut p. 43
Organ High Gain Amount of high-frequency boost/cut p. 43
Rotary Type Rotary eect type p. 43
Woofer Accel Woofer rotation speed change p. 43
Tweeter Accel Tweeter rotation speed change p. 43
Wf Slow Speed Woofer rotation low speed p. 43
Tw Slow Speed Tweeter rotation low speed p. 43
Wf Fast Speed Woofer rotation high speed p. 43
Tw Fast Speed Tweeter rotation high speed p. 43
Setting Explanation Page
MFX Type Multi-eect type p. 44
Delay Type Delay type p. 44
Reverb Type Reverb type p. 44
Wall Type Wall type p. 45
Portamento Portamento setting p. 25
Initial Touch Initial touch sensitivity p. 45
PedalBass Mode Pedal bass mode p. 45
Solo Mode Solo mode p. 45
Expression Part Part(s) aected by the expression pedal p. 46
L Foot Switch Function of the left footswitch p. 47
R Foot Switch Function of the right footswitch p. 47
N.Control
Parts enabled for eects applied to an
acoustic sound
p. 47
Damper Part Parts enabled for the damper pedal p. 45
Pitch Bend Range Pitch bend ranges p. 46
TxMIDI Channel Upper
MIDI transmit channel p. 48
TxMIDI Channel Lower
TxMIDI Channel Pedal
TxMIDI Channel Drum
TxMIDI Channel
Control
PC Number BankMSB
PC number p. 48PC Number BankLSB
PC Number PC Num
Settings That Are Stored After the Power Is Turned O
Setting Explanation Page
Registration Shift Registration shift p. 47
Damper Assign Damper pedal function p. 45
Expression Assign Expression pedal function p. 46
Expression Curve Expression curve p. 46
D-BEAM Sensitivity D-BEAM sensitivity p. 46
Modulation Lever
Rotary eect on/o controlled by
modulation lever
p. 47
Auto Std Tempo Auto standard tempo p. 48
MIDI IN Mode MIDI IN mode p. 48
Send PC Switch PC number transmission on/o p. 48
Master Tune Master tuning p. 49
LCD Contrast LCD contrast p. 39
Auto O Auto-o p. 39
Wireless Wireless settings p. 52
ATELIER Mode ATELIER mode p. 50
Settings That Are Stored in the Registrations
Stored Settings
Introduction Performing Recording Looper Settings
Appendix