Roland V-Drums TD-27 - Performing Along with a Song - Smartphone; Connecting via MIX IN Jack; Wireless Connection via Bluetooth; Playing Songs from Smartphone

13
KIT EDIT
ROOM
Here you can apply either Room ambience or reverb eects to the drum kit.
Parameters Common to ROOM and REVERB
Parameter Value Explanation
[F1] button (OFF, ROOM ON)
OFF, ROOM ON Turns the room eect on/o.
[F2] button (ROOM tab)
Type
ROOM, REVERB
Type of room reverberation
Select either room or reverb.
Level
-INF–+6.0dB Volume of reverb
[F3] button (SEND tab)
Room Send Volume
-INF–+6.0dB Amount of room applied to each pad
[F5] button (H & R)
H&R OFF, H&R ON Species whether head and rim of instruments are selected as a set (ON) or independently (OFF).
Parameters Specic to ROOM and REVERB
ROOM
Parameter Value Explanation
Room Type
SMALL STUDIO 1–4, LARGE STUDIO
1–4, LIVE HOUSE 1–4, STAGE 1–4,
MIDDLE HALL 1–4
Type of room
Distance
0–6 Sense of distance for the room's reverberation
Time
-64–0 Reverberation time of the room
REVERB
Parameter Value Explanation
Reverb Type
ROOM 1, 2, HALL 1, 2, PLATE Type of reverb
Pre Delay
0–100mSec Adjusts the delay time from the direct sound until the reverb sound is heard.
Time
0.1–10.0Sec Time length of reverberation
Density
0–127 Density of reverb sound
Diusion
0–127
Change in the density of the reverb sound over time
The higher the value, the denser the sound becomes as time elapses (The eect is more obvious for
longer reverb times).
LF Damp
0–100 Adjusts the low-frequency region of the reverb sound.
HF Damp
0–100 Adjusts the high-frequency region of the reverb sound.
Spread
0–127 Spread of the reverb sound
Tone
0–127 Tonal character of reverb sound