Roland V-Drums TD-27 - Editing a Drum Kit - Kit Edit Button; Editing with the [KIT EDIT] Button; Parameter Settings Explained

21
DRUM KIT
MUTE GROUP
Mute group settings let you specify that when you strike a pad, other pads in the same mute group are muted (silenced).
Parameter Value Explanation
MUTE SEND
– (OFF), 1–8
Specify the mute group number.
When you strike the pad of the number specied in MUTE SEND, the sound of the pad assigned to
the same number in MUTE RECEIVE is muted.
* Even if you specify the same number in MUTE SEND and MUTE RECEIVE for the same location
(e.g., head or rim) of the same pad, muting does not occur.
MUTE RECEIVE
POSITION
Specify how the sound is aected by the position at which you strike a pad.
Parameter Value Explanation
[F1] button (POSITION tab)
Position Control *1
OFF, ON
Species whether the nuances of your strike position or rim shot will (ON) or will not (OFF) aect
the tonal character. You can set this for the snare (head, rim), tom (head, rim), ride (bow), and AUX
(head, rim) trigger inputs.
Head: Strike position
Rim: Rim shot nuance
Bow: Strike position
[F2] button (POS AREA tab)
Position Area *1
INSIDE -5–DEFAULT– OUTSIDE +5
Species the striking area for the head or rim.
“INSIDE” settings make it easier to play notes toward the inside; “OUTSIDE” settings make it easier to
play toward the outside.
*1: This supports the following trigger inputs.
5 SNARE
5 TOM1–3
5 The bow (head) of RIDE
5 AUX1–3
* Depending on the pad that is connected or the instrument that is selected, there might be cases in which this has no eect.