Roland V-Drums TD-27 - Performing Along with a Song - Details; Types of Songs Supported; Playback Operations and Controls; A-B Repeat Functionality

14
KIT EDIT
MULTI EFFECT (MFX)
You can choose up to three eects from 30 types, and apply these eects to the drum kit.
Parameter Value Explanation
[F1] button (TYPE tab)
– MFX1–3
Select the multi-eect that you want to edit
MEMO
Move the cursor to the MFX1–3 position in the screen, and turn the dial.
Type
Type of multi-eect
& Refer to “Multi-Eect Parameters” (p. 42).
Level
-INF–+6.0dB Volume of the eect sound for the selected multi-eect
[F5] button (OFF, MFX1–3 ON)
OFF, MFX1–3 ON Turns on/o the multi-eect selected.
[F2] button (ASSIGN tab)
MFX Assign
MFX1–3 Select the multi-eect that is applied to each pad.
[F5] button (H & R)
H&R OFF, H&R ON Species whether head and rim of instruments are selected as a set (ON) or independently (OFF).
[F3] button (SEND tab)
MFX Send Volume
-INF–+6.0dB Eect send level for each pad
[F5] button (H & R)
H&R OFF, H&R ON Species whether head and rim of instruments are selected as a set (ON) or independently (OFF).
[F4] button (DRY+MFX tab)
MFX DRY+WET *1
DRY+MFX The dry sound and eect sound will be output.
MFX ONLY Only the eect sound will be output.
*1: MFX DRY+WET is specied for each pad. It cannot be specied for individual strike locations (such as the head or rim).
If MFX DRY+WET is set to “MFX ONLY,” some multi-eect settings might cause no sound to be output.