Roland V-Drums TD-27 - Assigning User Samples to Instruments; Selecting Instrument Group and User Sample

23
USER SAMPLE
Audio les that you created on your computer can be imported from an SD card into the TD-27, and played as instruments (User Sample function).
You can edit the sound of a user sample or apply eects to it in the same way as other instruments.
USER SAMPLE LIST
Here’s how to view a list of all user samples that have been imported. You can audition the sound, specify looping, and edit the name.
Parameter Value Explanation
[F1] button (LIST tab)
Play Type
Species how the user sample is sounded.
ONESHOT MONO
When you strike the pad, the currently-heard sound is silenced before the new sound is heard.
Notes do not overlap.
ONESHOT POLY When you strike the pad repeatedly, the sounds of the notes are heard overlapping.
LOOP ALT
The user sample plays repeatedly (loop).
Each time you strike the pad, the sound alternately plays or stops.
Gain
-12–+12 [dB] Volume of user samples
[F3] button (DELETE)
Deletes the currently selected user sample.
[F4] button (NAME)
Renames the currently selected user sample.
Reference
For details on how to assign a name, refer to “Renaming a Drum Kit” in “Reference Manual” (PDF).
[F2] button (START/END tab)
Zoom
–
Zooms the waveform display in or out.
MEMO
You can zoom-in/out on the horizontal axis by holding down the [ENTER] button and pressing the
cursor [ ] [ ] buttons.
You can zoom-in/out on the vertical axis by holding down the [ENTER] button and pressing the
cursor [
] [ ] buttons.
Start *1
0–07937742 Adjusts the start point (the location at which the user sample starts playing).
End *1
257–07937999 Adjusts the end point (the location at which the user sample stops playing).
*1: You can’t set the end point earlier than the start point.
You can’t set the start point and end point to the same value.
For both the start point and end point, you can’t specify a value that exceeds the length of the user sample.