Roland V-Drums TD-27 - Connecting Equipment - Rear Panel; Power Switch and MIDI Ports; Audio Input;Output Jacks; DC IN and Trigger Jacks

6
KIT EDIT
TOM/TOM BRUSH
Parameter Value Explanation
[F1] button (INST tab)
Tuning
-100–100
Tuning of the head
MEMO
You can also change the value of this setting by using the [TUNING] knob.
Muing
OFF, TAPE1–5, FELT1–4
Muing (muting) setting
MEMO
You can also change the value of this setting by using the [MUFFLING] knob.
[F2] button (EDIT tab)
Shell Depth
1.0–30.0 Depth of the shell
Head Type
CLEAR, COATED, PINSTRIPE Type of head
Snare Buzz
OFF, 1–8 Resonance to the snare
HI-HAT/HI-HAT PROC/HI-HAT ELEC
Parameter Value Explanation
[F1] button (INST tab)
Size
1.0–40.0
Hi-hat diameter
MEMO
You can also change the value of this setting by using the [TUNING] knob.
Fixed
NORMAL, PRESS, CLOSE, HALF, OPEN
Openness of the hi-hat
If something other than “NORMAL” is selected, the openness of the hi-hat does not change,
regardless of how much you press the hi-hat pedal.
MEMO
You can also change the value of this setting by using the [MUFFLING] knob.
[F2] button (EDIT tab)
Thickness
THIN-5–STANDARD–THICK +5 Thickness of the hi-hat
Pedal HH Volume
-INF–+6.0dB
Volume of pedal hi-hat
MEMO
The “Pedal HH Volume” can also be edited from the KIT VOLUME screen (KIT VOL tab) (p. 15).
MEMO
The closed hi-hat position (Fixed = CLOSE) can be enabled by pressing an optional footswitch or hitting a pad switch. Please refer to “OPTION” (p. 40).