Roland VersaStudio BN-20 - Page 17

Switching the Ink
17
ECO-SOL MAX 3 Ink Switching Method
When a printer that does not use MAX 3 ink is connected to VersaWorks
2. Temporarily delete the printer that has been switched to MAX 3 ink from VersaWorks.

Start VersaWorks.

When the screen shown in the gure is
displayed, click [OK].
The [Printer Settings] screen will appear.

Select a printer that has been switched to
MAX 3 ink under [Printer List], and then
click
.

When the screen shown in the gure ap-
pears, conrm that you want to delete the
selected printer, and then click [Yes].
The selected printer is deleted from the [Printer
List].