Roland VERSELAB MV-1 - Using Sampled Audio; Getting Ready to Sample; Configuring the External Input; Sampling Settings

31
MFX Parameters
40 4Tap Pan Delay
This eect has four delays.
R out
L out
Balance W
Balance W
Balance D
Balance D
L in
Quadruple
Tap Delay
Quadruple
Tap Delay
R in
Delay 1
Feedback
Delay 2
Delay 3
Delay 4
1
L
2 3
4
R
Parameter Value Explanation
Delay 1 Time
(sync sw) OFF, ON
If this is ON, the rate synchronizes with the
tempo of the rhythm.
Delay 1 Time
(msec) 1–2600 [msec]
Adjusts the time until Delay 1 is heard.
Delay 1 Time
(note)
Note
&
“Note” (p. 51)
Delay 2 Time (sync sw) OFF, ON
If this is ON, the rate synchronizes with the
tempo of the rhythm.
Delay 2 Time
(msec)
1–2600 [msec]
Adjusts the time until Delay 2 is heard.
Delay 2 Time
(note)
Note
&
“Note” (p. 51)
Delay 3 Time (sync sw) OFF, ON
If this is ON, the rate synchronizes with the
tempo of the rhythm.
Delay 3 Time
(msec) 1–2600 [msec]
Adjusts the time until Delay 3 is heard.
Delay 3 Time
(note)
Note
&
“Note” (p. 51)
Delay 4 Time (sync sw)
OFF, ON
If this is ON, the rate synchronizes with the
tempo of the rhythm.
Delay 4 Time
(msec) 1–2600 [msec]
Adjusts the time from the original sound until
Delay 4 is heard.
Delay 4 Time
(note)
Note
&
“Note” (p. 51)
Delay 1 Feedback -98–+98 [%]
Adjusts the proportion of the delay sound
that is fed back into the eect. Negative (-)
settings will invert the phase.
HF Damp
200, 250, 315, 400, 500,
630, 800, 1000, 1250,
1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000,
BYPASS [Hz]
Adjusts the frequency above which the delay
sound fed back to the eect is ltered out
(BYPASS: no cut).
Delay 1 Level
0–127 Output level of Delays 1–4
Delay 2 Level
Delay 3 Level
Delay 4 Level
Low Gain -15–+15 [dB] Gain of the low range
High Gain -15–+15 [dB] Gain of the high range
Balance D100:0W–D0:100W
Volume balance between the direct sound (D)
and the delay sound (W)
Level 0–127 Output Level
41 Multi Tap Delay
This eect has four delays. Each of the Delay Time parameters can be
set to a note length based on the selected tempo. You can also set the
panning and level of each delay sound.
R out
L out
Balance W
Balance W
Balance D
L in
Multi Tap
Delay
Multi Tap
Delay
2-Band EQ2-Band EQ
2-Band EQ2-Band EQ
Balance D
Delay 1
Feedback
Delay 2
Delay 3
Delay 4
R in
Parameter Value Explanation
Delay 1 Time
(sync sw) OFF, ON
If this is ON, the rate synchronizes with the
tempo of the rhythm.
Delay 1 Time
(msec) 1–2600 [msec]
Adjusts the time from the original sound until
Delay 1 is heard.
Delay 1 Time
(note)
Note
&
“Note” (p. 51)
Delay 2 Time (sync sw) OFF, ON
If this is ON, the rate synchronizes with the
tempo of the rhythm.
Delay 2 Time
(msec)
1–2600 [msec]
Adjusts the time from the original sound until
Delay 2 is heard.
Delay 2 Time
(note)
Note
&
“Note” (p. 51)
Delay 3 Time (sync sw) OFF, ON
If this is ON, the rate synchronizes with the
tempo of the rhythm.
Delay 3 Time
(msec) 1–2600 [msec]
Adjusts the time from the original sound until
Delay 3 is heard.
Delay 3 Time
(note)
Note
&
“Note” (p. 51)
Delay 4 Time (sync sw)
OFF, ON
If this is ON, the rate synchronizes with the
tempo of the rhythm.
Delay 4 Time
(msec) 1–2600 [msec]
Adjusts the time from the original sound until
Delay 4 is heard.
Delay 4 Time
(note)
Note
&
“Note” (p. 51)
Delay 1 Feedback -98–+98 [%]
Adjusts the proportion of the delay sound
that is fed back into the eect. Negative (-)
settings will invert the phase.
HF Damp
200, 250, 315, 400, 500,
630, 800, 1000, 1250,
1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000,
BYPASS [Hz]
Adjusts the frequency above which the delay
sound fed back to the eect is ltered out
(BYPASS: no cut).
Delay 1 Pan
L64–63R Stereo location of Delays 1–4
Delay 2 Pan
Delay 3 Pan
Delay 4 Pan
Delay 1 Level
0–127 Output level of Delays 1–4
Delay 2 Level
Delay 3 Level
Delay 4 Level
Low Gain -15–+15 [dB] Gain of the low range
High Gain -15–+15 [dB] Gain of the high range
Balance D100:0W–D0:100W
Volume balance between the direct sound (D)
and the eect sound (W)
Level 0–127 Output Level