To Next PageTo Next PageWhy sound comes from the other channel even when Pan is set to one side on Roland XPS-10?
If, even when you set the Pan for a patch completely to one side on your Roland Synthesizer, sound still comes from the other channel, it's because the internal efefcts are in stereo. Even with Pan set to one side, you'll still hear efefct sounds from the other channel.
Why does the same tone sound different in Performance mode on my Roland XPS-10?
If the same tone sounds different when you listen to it in the Performance on your Roland Synthesizer, it's because in Performance mode, the parameters of each part can further modify settings like pan, octave, and filter. Also, the multi-efefcts used in the Performance may differ from those selected by the patch. Check the multi-efefct, Chorus, and Reverb settings of the performance.
General| Bit rate | 16 bit |
|---|---|
| Product type | Digital synthesizer |
| Keyboard number of keys | 61 |
| Maximum polyphony (notes) | 128 |
| Reverberation effects quantity | 5 |
| Power source type | AC |
| Display type | LCD |
| Built-in display | Yes |
| Display number of lines | 2 lines |
| Display number of characters | 16 |
| Headphone outputs | 1 |
| USB ports quantity | 2 |
Weight and Dimensions| Depth | 251 mm |
|---|---|
| Width | 1002 mm |
| Height | 93 mm |
| Weight | 4000 g |
Details on the 1,000+ built-in sounds, including ethnic and local instruments.
Allows importing audio files from a USB drive to be assigned pitches and played.
Enables playing audio files from a USB flash drive using the AUDIO PAD.
Describes user-friendly interface features like sound selection, split/dual settings, and favorites.
Highlights the compact and lightweight design for easy mobility.
Detailed explanation of the XPS-10's front panel controls and indicators.
How to select single tones (Patch Mode) and multiple tones (Performance Mode).
Guide to layering sounds (Dual) and using different sounds for each hand (Split).
How to save and recall frequently used sounds or performances.
How to recall saved favorite sounds and performances.
Using sliders to adjust volume levels for different parts.
How to switch between different banks of favorite settings.
How to view, edit, or delete registered favorites.
Instructions for setting up and using the Split function for different hand parts.
How to adjust the split point on the keyboard.
How to swap the upper and lower sounds in Split/Dual mode.
How to select and activate a performance.
How to assign patches or drum kits to parts within a performance.
Explanation of the CUTOFF and RESONANCE sliders for tonal shaping.
Guide to using the ATTACK and RELEASE sliders for volume envelope.
Using CHORUS and REVERB sliders to enhance sound.
Key instructions for preventing fire, electric shock, injury, and damage.
