Bread slicer C42 – C42S – C52 – C52S – G42
(Original instructions) – Edit. 02/2013 – Rev.A
2.5
IDENTIFICATION PLATE
The identification plate, displaying in indelible form the CE marking, Manufacturer’s details,
machine model, serial number, year of manufacture, weight and essential electrical specifications is
fixed on the back of the machine, indicatively in the position shown in Figure 6.
Figure 6
3 INSTALLATION AND USE
3.1
WARNINGS RELATED TO INSTALLATION SITE
The premises where the machine is to be installed must comply with current legislation and
standards, also in view of its intended use, and must have walls and floors that can be easily cleaned
and washed, in an excellent state of repair and hygiene.
The electrical system of the site of use must be completely realised, serviced and periodically
checked by professionally qualified personnel. Use of the machine is not permitted in environments
where there is risk of fire and/or explosion and/or any type of incident considered of importance by
current legislation.
3.2
LIFTING, TRANSPORTATION AND POSITIONING INSTRUCTIONS
When shipped from the manufacturer’s premises, the machine is placed in a thick cardboard box
(carton) or a wooden box (crate) and fixed on a pallet.
The place where the machine is kept and/or used must, besides complying with existing laws and
standards, ensure maximum stability of the machine and adequate protection against all possible
damage and against the elements.
If the machine is not going to be used for any length of time, or for a period appreciably longer than
normal pauses in the activity performed in the premises where it is used, it must be put in a closed,
dry place off limits to unauthorised people where it cannot be damaged; it must also be covered with
opaque waterproof cloths. The machine is shipped in a single pack, fully assembled. When shipped
from the manufacturer’s premises, the machine is packed and fixed on a pallet and, if necessary or
agreed in the contract, in a thick cardboard box (carton) or a wooden box (crate). When moving and
transporting the machine, you must take all possible precautions to avoid, or to limit, risks for
persons, animals and things.
To Next Page
Loading...