Bread slicer C42 – C42S – C52 – C52S – G42
(Original instructions) – Edit. A
13
• At the start of each working day and/or shift, check that the safety devices are perfectly
efficient.
3.4.2 SWITCHING ON AND MAKING READY FOR OPERATION
To switch on the machine, connect the plug to the power socket; the light in the button ref. 1 Figure
11 will come on, indicating that the machine is live.
3.4.3 MACHINE FUNCTIONING AND USE
3.4.3.1
BASIC MACHINE
With reference to Figure 11:
Machine without blade lubrication system:
1. Press the button ref. 1 to enable machine operation.
2. Pull the lever ref. 2 all the way towards you: the bread pusher moves back to the end of the bread
loading surface and the blades start moving.
3. With your other hand lay the bread on the loading surface between the bread pusher and the blades
(keep your hand away from the blades)
4. Release the lever ref. 2 accompanying it on the way back, so that it does not acquire excessive
speed or exert sudden force on the bread; the bread is pressed by the pusher against the blades,
which penetrate into the product and cut it.
5. If you want to wrap the sliced bread, place the place the loaf with the slices well aligned on the
arm ref. 3, pass the bag over the arm holding the sliced loaf then extract the bag together with the
slices of bread so that the loaf is inside the bag; now seal the bag.
Figure 11
Machine with blade lubrication system: when the button ref. 1 is pressed the blades start moving; if
the button is released without having moved the lever from rest position, the blades stop; instead, if
the button is released after having moved the lever from rest position, the blades keep moving; this
facilitates the detachment of the blades from the lubrication pad, which otherwise would be difficult.
Pull the lever all the way towards you and proceed as described for the machine without lubrication
system from point 2 onwards.
3.4.4 CRUMB COLLECTION DRAWER
Each model/version of the machine is provided with a crumb collection drawer. The drawer ref. 1
provides to all effects a protection against reaching dangerous parts, so when it has to be taken out for
emptying and/or cleaning it is necessary to turn off the main switch.
Lever in rest position Lay bread between pusher and blades
Bread holding flaps Lever fully pulled
To Next Page
Loading...