EasyManuals Logo

Rosco Maximizer 3B User Manual

Rosco Maximizer 3B
364 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
1
Rosco Maximizer 3B Asphalt Distributor 1-1
Thank you for purchasing the Rosco Maximizer 3B
Asphalt Distributor. We wish you many years of safe and
efî›™cient operation of your machine.
READ THIS MANUAL PRIOR TO OPERATING the
unit. This manual is an important part of the machine
and should be kept with the machine at all times in the
dedicated storage container on the machine. Even
though you may be familiar with similar equipment,
you MUST read and understand this manual before
operating this machine. Reading the manual will help you
and others avoid injury and help prevent any damage to
the machine. If this manual becomes lost or damaged,
contact your authorized LeeBoy Dealer immediately to
order a replacement (see Contact Information Section
3).
This manual is intended as a guide for the safe and
efî›™cient use of the machine. This manual covers the
procedures for proper operation and maintenance of
the machine. This manual contains information that was
available at the time of printing and is subject to change
without notice.
This manual should be used with all related
supplemental books, engine and transmission manuals,
and parts books. Related Service Bulletins should be
reviewed to provide information regarding some of the
recent changes.
If any questions arise concerning this publication or
others, contact your local LeeBoy Dealer for the latest
available information.
Introduction
Section 1
This manual provides information for use by the
equipment operator under the following headings:
Safety—See Section 2 for important safety guidelines
information.
General Information—See Section 3 for important
warranty, contact, and nameplate information.
Specications—See Section 4 for all major system
speciî›™cations and typical torque value tables.
Component Location—See Section 5 for general
overview of controls and major components.
Operation—See Section 6 for control functionality and
normal equipment operation.
Maintenance—See Section 7 for basic preventive
maintenance and repair procedures.
Troubleshooting—See Section 8 for problem
descriptions and recommended solution tables.
Schematics—See Section 9 for schematic diagrams of
electrical wiring.
Illustrated Parts List (IPL)—See Section 10 for
illustrations, descriptions and part numbers of available
service parts.
Return to
Last Viewed
Return to
Thumb Index

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rosco Maximizer 3B and is the answer not in the manual?

Rosco Maximizer 3B Specifications

General IconGeneral
BrandRosco
ModelMaximizer 3B
CategoryUtility Vehicle
LanguageEnglish