Rosco Maximizer 3B User Manual

6-20 Rosco Maximizer 3B Asphalt Distributor
Operation
Electro Motive Radiation
Interference
High Electro Motive Radiation (EMR) produced by
citizen band radios and other sources can interfere
with the function of the Plus One Controller. EMR
causes stray voltages to be induced in the signals to
and from the computer. As a result, the machine could
unespectedly speed up and/or the application rate
could suddenly change.
If EMR is present, the machine should
be tested at a remote site to insure that there are no
abrupt movements or extreme levels of application.
Possible solutions for problems caused by EMR include:
1. Remove the source of the radiation.
2. Move the source of the radiation away from the
computer area.
3. Shield the computer and/or the wiring (particularly
the power lead going to the computer) in metal
enclosures.
Plus One Controller Error
Messages
If the Plus One Controller malfunctions, it will display an
error message informing the operator that there is a
problem. If this occurs, do not try to repair the controller
on-site. Call your authorized Rosco Dealer or a Rosco
Factory Representative for assistance.
System Fault Screen
Figure 6-14
Return to
Last Viewed
Return to
Thumb Index

Rosco Maximizer 3B Specifications

General

Brand	Rosco
Model	Maximizer 3B
Category	Utility Vehicle
Language	English