Rosco Maximizer 3B User Manual

4-10
Rosco Maximizer 3B Asphalt Distributor
Specications
Table 4-5. Guide For Loading Asphalt Products
PRODUCT TO BE LOADED
LAST PRODUCT IN
TANK
ASPHALT CEMENT
CUTBACK
ASPHALT
CATIONIC
EMULSION
ANIONIC
EMULSION
Asphalt Cement OK to load Ok to load Empty to no
measurable quantity
Empty to no
measurable quantity
Cutaback Cement * Empty Tank Ok to load Empty to no
measurable quantity
Empty to no
measurable quantity
Cationic Emulsion * Empty Tank Empty to no
measurable quantity
Ok to load Empty to no
measurable quantity
Anionic Emulsion * Empty Tank Empty to no
measurable quantity
Empty to no
measurable quantity
Ok to load
Crude Petroleum and
Residual Fuel Oils
* Empty Tank Empty to no
measurable quantity
Empty to no
measurable quantity
Empty to no
measurable quantity
Any Product not
listed above
Tank must be
cleaned
Tank must be
cleaned
Tank must be
cleaned
Tank must be
cleaned
*
Any material remaining in tank will produce dangerous conditions.
and machined surfaces. Values are based on
physical limitations of clean, plated and lubricated
hardware. In all cases, when an individual torque
value is specied, it should be followed instead of
values given in this table.
Replace original equipment with
hardware of equal grade.
Table 4-6. Torque Specications For Metric Fasteners
CLASS 8.8 [GRADE 5 EQUIVALENT] CLASS 10.9 [GRADE 8 EQUIVALENT]
NOMINAL SIZE
& PITCH
TORQUE FT. LBS. TORQUE N•m TORQUE FT. LBS. TORQUE N•m
Dry Lubed Dry Lubed Dry Lubed Dry Lubed
M4 x 0.7 2.27 1.70 3.07 2.30 2.27 2.31 4.17 3.13
M5 x 0.8 4.58 3.43 6.20 4.65 6.22 4.67 8.43 6.33
M6 x 1 7.75 5.83 10.5 7.90 10.60 7.97 14.3 10.8
M8 x 1.25 18.89 14.17 25.6 19.2 18.95 19.26 34.8 26.1
M10 x 1.25 39.11 29.52 53.0 40.1 53.87 40.59 73.0 55.0
M12 x 1.75 64.94 48.71 88.0 66.0 88.56 66.42 120.0 90.0
M14 x 2 103.32 77.49 140.0 105.0 140.22 107.01 190.0 145.0
M16 x 2 162.36 121.77 220.0 165.0 221.40 166.05 300.0 225.0
M20 x 2.5 317.34 236.16 430.0 320.0 428.04 321.03 580.0 435.0
M24 x 3 516.12 409.59 740.0 555.0 754.38 557.19 1010.0 755.0
M27 x 3 797.04 597.78 1080.0 810.0 1084.86 811.80 1470.0 1100.0
M30 x 3.5 1084.86 811.80 1470.0 1100.0 1476.00 1107.00 2000.0 1500.0
Torque Specs
Metric Fasteners
The following Table lists torque values
for standard hardware and are intended as a guide
for average application involving typical stresses
Return to
Last Viewed
Return to
Thumb Index

Rosco Maximizer 3B Specifications

General

Brand	Rosco
Model	Maximizer 3B
Category	Utility Vehicle
Language	English