Rosco Maximizer 3B User Manual

7-4 Rosco Maximizer 3B Asphalt Distributor
Maintenance
Routine Maintenance
General Information
Maintenance must be a planned program that
includes periodic machine inspection and lubrication
procedures, (Table 7-1. Maintenance Intervals Chart).
The maintenance program must be done based on
the machine’s “Operating Hours” recorded on the
hourmeter, or on a “Periodic Schedule” which is done at
daily, weekly, monthly or yearly intervals.
SYSTEM ITEM
3 Hours
Twice Daily
8 Hours
Daily
20 Hours
Weekly
80 Hours
Monthly
250 Hours
Semi-annually
400 Hours
Annually
C = Check, CL = Clean, L = Lubricate, R = Replace, T = Tighten
Spraybar
Hydraulic Cylinders CL
Nozzles, adjust alignment if necessary C
Hardware, tighten if necessary C
Spraybar, Extension & Pivot Point Gaskets & Washers R
Truck
Truck, service per Truck Operator’s Manual C
Wash Machine CL
Radar Horn Face Cover CL
Air System C
Engine
Coolant Level C
Engine Oil Level C
Fuel Level C
General Information
This section gives the necessary procedures for routine
and general maintenance on the Rosco Maximizer 3B
Asphalt Distributor.
NOTE: By following a careful service and maintenance
program for your Asphalt Distributor, you will
insure many years of trouble free operation.
Follow all safety precautions in this
manual.
Table 7-1. Maintenance Intervals Chart (continued)
Return to
Last Viewed
Return to
Thumb Index

Rosco Maximizer 3B Specifications

General

Brand	Rosco
Model	Maximizer 3B
Category	Utility Vehicle
Language	English