6
Rosco Maximizer 3B Asphalt Distributor 6-35
Operation
Handspray Mode (Spray / Bar
Circulate)
Some operators have found that using the SPRAY/
BAR CRCLT mode (Figure 6-24) allows better control
of the handspray wand. SPRAY/BAR CRCLT mode will
also eliminate any setup of material that is still in the
spraybar.
NOTE: This mode signicantly reduces the pump
pressure since the 2-Way and 3-Way valves are
open. The operator may have to increase the
GPM 25 to 50 gallons to get sufcient pressure
to the wand.
Return to
Last Viewed
Return to
Thumb Index