Rosco Maximizer 3B User Manual

4
Rosco Maximizer 3B Asphalt Distributor 4-7
Specications
ITEM SPECIFICATION
Spray System 16 foot (4.9 m) full circulating, extendable spraybar,
comprised of two 8 foot (2.4 m) independently
controlled spraybar sections. When in spray mode and
if corresponding nozzle enable switches are enacted
each nozzle turns on when the spraybar is extended and
turns off when retracted. All functions operated by the
Plus One Controller in the cab.
Nozzles and Valves Brass, slotted nozzles. Non-clogging system. Manual
valve actuators allow the operator to control spray in 4
inch (10.16 cm) increments as the spraybar extends and
retracts.
Table 4-2. Controller Specication Table
ITEM SPECIFICATION
Controller Plus One Controller works with electronic pump speed
control to govern the application rate according to the
distributor speed and spraybar width. Provides On/Off
control of spray nozzles in 1 foot (.3 m) increments. 4
inch (10.16 cm) nozzle control is possible with spraybar
extension and retraction. Memory feature capable of
storing 12 preset application rates included. Provides
readouts for speed (FPM), pump ow (GPM), total
asphalt sprayed (gallons), total area covered (square
yards), tank temperature, total run time meter (hours),
spraybar width (feet and inches). System includes GPS
speed sensor and rear mounted controls for manual
control of asphalt pump speed and direction as well as
hydraulic spraybar functions.
Table 4-1. Tank Specication Table (continued)
Return to
Last Viewed
Return to
Thumb Index

Rosco Maximizer 3B Specifications

General

Brand	Rosco
Model	Maximizer 3B
Category	Utility Vehicle
Language	English