August 2012
16
Quick Start Guide
Product Certifications
European Directive Information
The EC declaration of conformity for all applicable European directives for this product
can be found on page 28 and on the Rosemount website at www.rosemount.com.
A hard copy may be obtained by contacting your local sales office.
ATEX Directive (94/9/EC)
Complies with the ATEX Directive.
Pressure Equipment Directive (PED) (97/23/EC)
The Rosemount 2120 is outside the scope of the PED Directive.
L.V. Directive
EN61010-1 Pollution degree 2, Category II (264 V maximum),
Pollution degree 2, Category III (150 V maximum)
Electro Magnetic Compatibility (EMC) Directive
EN61326 Emissions to Class B. Immunity to industrial location requirements.
CE-mark
Complies with applicable directives (EMC, ATEX, and LVD)
Ordinary location certification for FM
G5 Project ID: 3021776
The switch has been examined and tested to determine that the design meets basic
electrical, mechanical, and fire protection requirements by FM, a nationally recognized
testing laboratory (NRTL) as accredited by the Federal Occupational Safety and Health
Administration (OSHA).
Ordinary location certification for CSA
G6 Certificate Number: 06 CSA 1805769
The switch has been examined and tested to determine that the design meets basic
electrical, mechanical, and fire protection requirements by CSA, a nationally recognized
testing laboratory as accredited by the Standards Council of Canada (SCC).
Single Seal
Canadian Registration Number
Certificate Number CRN 0F04227.2C
The requirements of CRN are met when a 2120 vibrating fork level switch is configured
with 316/316L stainless steel (1.4401/1.4404) wetted parts and either NPT threaded
or 2-in. to 8-in. ASME B16.5 flanged process connections.
To Next Page
Loading...
