Need help?Do you have a question about the Rosemount 848T and is the answer not in the manual?
General| Enclosure | Aluminum or Stainless Steel |
|---|---|
| Operating Temperature | -40 to 85°C (-40 to 185°F) |
| Measurement Type | Temperature |
| Input | RTD, Thermocouple |
| Stability | ±0.1% of URL per year |
| Communication Protocol | HART |
| Sensor Type | RTD, Thermocouple |
| Output | 4-20 mA with HART |
| Enclosure Rating | Type 4X, IP66 |
| Mounting | Field Mount |
Details the correct order for powering up the wireless device and gateway for network installation.
Specifies the correct vertical positioning and placement of the antenna for optimal communication.
Instructions for replacing temporary orange plugs with included conduit plugs using thread sealant.
Guides on setting up the Network ID and Join Key to connect the device to the wireless network.
Explains how to configure sensor inputs using a Field Communicator for different sensor types.
Describes the remote mount configuration for installing the sensor separately from the transmitter housing.
Provides instructions for installing an optional voltage adapter for 0-10 volt measurements.
Verifying device operation and network status using a Field Communicator with HART communication.
Checking device network status and communication through the Smart Wireless Gateway's web interface.
Confirming the device has joined the network and is operating correctly via the AMS Device Manager.
Overview of regulations and certifications for wireless device RF spectrum usage globally.
Details compliance with FCC Rules and Industry Canada regulations for device operation.
Information on obtaining the EC Declaration of Conformity for the product.
Notes the examination for basic electrical, mechanical, and fire protection requirements.
Covers NEC and CEC requirements for installing Division and Zone marked equipment.
To Next Page
