Rosemount 8732E - Product Certifications; European Directive Information and CE Marking; International Certifications and C-Tick Marking

Quick Installation Guide
00825-0100-4663, Rev BC
December 2012
Rosemount 8732
28
Product Certifications
Approved Manufacturing Locations
Rosemount Inc. — Eden Prairie, Minnesota, USA
Fisher-Rosemount Technologias de Flujo, S.A. de C.V. —
Chihuahua Mexico
Emerson Process Management Flow — Ede, The Netherlands
Asia Flow Technology Center — Nanjing, China
EUROPEAN DIRECTIVE INFORMATION
The EC declaration of conformity can be found on page 35. The most recent revision can be
found at www.rosemount.com.
Type n protection type in accordance with EN50021
• Closing of entries in the device must be carried out using the appropriate EEx e or EEx
n metal cable gland and metal blanking plug or any appropriate ATEX approved cable
gland and blanking plug with IP66 rating certified by an EU approved certification body.
CE Marking
Complies with EN 61326-1: 2006
For Rosemount 8732E transmitters:
Complies with Essential Health and Safety Requirements:
EN 60079-0: 2006
EN 60079-1: 2007
EN 60079-7: 2007
EN 60079-11: 2007
EN 60079-26: 2004
EN 60079-27: 2006
EN 50281-1-1: 1998 + A1
International Certificates
Rosemount Inc. complies with the following IEC Requirements.
C-Tick Marking
For Rosemount 8732E transmitters:
IEC 60079-0: 2004
IEC 60079-1: 2007-04
IEC 60079-11: 2006
IEC 60079-26: 2004
IEC 60079-7: 2006-07
IEC 61241-0: 2004
IEC 61241-1: 2004
4663RevBCQIG.fm Page 28 Thursday, January 10, 2013 5:33 PM