AC750 Wireless Dual Band Gigabit Router RNX-AC750RT User Manual
- 41 -
Generate New PIN - Click this button, and then you can get a new random value for the
router's PIN. You can ensure the network security by generating a new PIN.
Disable device PIN - If this box is checked, and then wireless clients will not be able to
connect to the wireless network with PIN code.
Add device - You can add a new device to the existing network manually by clicking this
button.
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless adapter and router using either Push Button Configuration (PBC)
method or PIN method.
Note:
To build a successful connection by WPS, you should also do the corresponding configuration of
the new device for WPS function meanwhile.
I. Use the Wi-Fi Protected Setup Button
Use this method if your client device has a WPS button.
Step 1: Press the WPS/Reset button on the back panel of the router, as shown in Figure 4-16.
You can also keep the default WPS status as Enabled and click the Add device button
in Figure 4-15. Then choose “Press the button of the new device in two minutes” and
click Connect, shown in Figure 4-17.
Figure 4-16
Figure 4-17 Add A New Device
Step 2: Press and hold the WPS button of the client device.
To Next Page
Loading...
