Rosslare AC-F Series User Manual

Programming
56 AC-F/G4x Series Installation and Programming Manual
If the PIN or user card presented is valid, the left LED stops
flashing and the controller is ready for you to enter the next
3-digit slot number (refer to Step 3
) for the slot to which
you
want to assign a code.
5.
Do one of the following:
 Press # to move to the next available user slot number.
 Enter another 3-digit user slot number.
 If you do not wish to continue enrolling codes, press #
twice and the controller returns to Normal mode.
5.12.3.2 Enrolling Secondary Codes using the Code Search
Method
The code search method enables to quickly enroll a secondary
code for a user whose primary code is known and whose slot
number is unknown.
To enroll secondary codes using the Code Search method:
1.
Enter Programming mode.
2.
Press 7 to enter Menu 7.
The right LED turns orange.
3.
Enter 000 as the 3-digit user slot number.
The right LED flashes orange.
Orange
Orange
Green

Rosslare AC-F Series Specifications

General

Brand	Rosslare
Model	AC-F Series
Category	Controller
Language	English