Rosslare AC-F Series User Manual

Programming
AC-F/G4x Series Installation and Programming Manual 57
The controller is now waiting for the Primary code of the
user to whom you want to add a Secondary code.
4.
Perform one of the following:
Enter the PIN code belonging to the user
for whom you wish to add a Secondary
code.
Present the user card belonging to the user for whom you
wish to add a Secondary code.
The left LED flashes red.
If the Primary code entered is not valid, you hear a long
beep and the unit continues to wait for a valid Primary code.
5.
Perform one of the following:
 Enter the PIN code to be used as the
Secondary code.
 Present the user card to be used as the Secondary code.
If the Secondary code is valid, the controller beeps three
times and returns to Normal mode.
If the Secondary code is invalid, the controller sounds a long
beep, and the unit continues to wait for a valid Secondary
code to be entered.
Red
Orange

Rosslare AC-F Series Specifications

General

Brand	Rosslare
Model	AC-F Series
Category	Controller
Language	English