Rosslare AY-B9350 - Page 26

AY-B9350 User Manual 26
④
Message on the left will be displayed when input is
completed. Press [OK] button to complete registration
and move to the upper menu.
To register fingerprint again, press [Retry] button to
start it again from the process of
②
above. To cancel it,
press [ ] button to move to upper menu.
If a fingerprint is similar with an already registered
fingerprint, message of “similar with an already
registered fingerprint” will be displayed as shown on the
left. In this case, press [Retry] button to start it again
from the process of
②
above.
To cance l i t, pres s [ ] button to move to upper menu.
※ Max 10 fingerprints for each ID can be registered, but more than 10 fingerprints can
be registered.
In case of failing after 2~3 times of registration try according to correct fingerprint
registration method, it is recommended that face, password or card is used.