Rosslare AY-B9350 - System

AY-B9350 User Manual 39
3.6. System
3.6.1. System
Select [System]
à
[System] in the main menu to display the screen below.
▶ Default setting: same with the setting in the left
screen
▶ Length of user ID
This part is to set the length of user ID. It can be
changed to 4~ 20-digit ID and it must be same
with the length of registered ID at the server
program. If ID registered at the server program
uses 6-digit ID of ‘000075’, set it to ‘6’.
▶ Authentication
This item is to decide authentication priority
between the terminal and the network server.
Authentication will be performed according to the
setting order.
▶ Operation Mode
There are Network Mode that requires server
connection and Standalone Mode where the
terminal can function on its own without server
connection. When switching from the Stand Alone
mode to the Network mode, there may be a
discrepancy between the server data and the
terminal data. To solve this, download the users
from Bio9000 to the terminal or vice versa.
To a pply t he setting value, press [OK] button or press [BACK] button to cancel and to
move to the upper menu. If [OK] button is pressed without changing the setting value,
directly move to upper menu.
To continuously set another item, press the relevant menu item button on the left