AY-B9350 User Manual 60
This is to copy the relevant data from a SD card to the terminal
- User data: Copy user data of *.ndb file name from ‘eNBioAccessT9/user’ folder in the
SD card to the terminal.
- System option: Copy option setting values of the terminal saved in the SD card
(‘eNBioAccessT9/config’ folder) by exporting to the terminal.
To a pply a new DB or setting value when import is performed, the terminal must be
rebooted.
▶ Others
- Theme: This is to copy voice file in ‘eNBioAccessT9/audio’ folder of SD card to the
terminal.
In case of replacing authentication success (user_ok.mp3), authentication
failure (user_fail.mp3) message with user voice, copy each of voice defined by
a user by designating it as a stipulated file name to play user voice.
- F/W Upgrade: This is to upgrade firmware from a SD card
(Firmware must be located in ‘eNBioAccessT9’ folder in the SD card.)
To move to upper menu af ter upgrade, press [OK] or [BACK] button.
To Next Page
Loading...
