Need help?Do you have a question about the Rosslare AY-Q6250 and is the answer not in the manual?
General| Weight | 145g (0.32 lbs) |
|---|---|
| Read Range | Up to 10 cm |
| Operating Voltage | 5V DC |
| LED Indication | Yes |
| Beeper | Yes |
| Compatibility | Windows, Linux, Android |
| Operating System Compatibility | Windows, Linux, Android |
| Operating Current | Standby: 35mA@12VDC, Maximum: 80mA@12VDC |
| Current Consumption | Standby: 35mA@12VDC, Maximum: 80mA@12VDC |
Lists key features of the AY-Q6250 and AY-Q6350 readers, including reader types and programmable formats.
Lists the RFID transponders compatible with the AY-Q6250 and AY-Q6350 readers.
Details electrical properties like power supply, voltage, current, and cable distance.
Describes operating temperature, humidity, and environment suitability for outdoor use.
Provides step-by-step guidance on how to physically mount the reader unit on a surface.
Details the procedure for connecting the reader unit's wires to the controller.
Explains the standard operating mode of the reader in CSN mode for card scanning.
Describes the function and indication of the optical back tampering mechanism.
Explains the reader's transmit mode and LED control for operation.
Covers selection of keypad and card data transmission formats.
Covers changing programming/facility codes, backlight, and recovery procedures.
Provides instructions to reset all settings to their original factory defaults.
To Next Page
