Keypad Programming Instructions (AY-Q6350)
30 AY-Q6x50 Family Installation and Programming Manual
5.14 Replacing a lost Programming Code
In the event that the Programming code is forgotten, the AY-Q6350
may be reprogrammed in the field using the following instructions:
1. Remove power from the reader.
2. Activate tamper by removing the reader from the wall or
removing the reader's case.
3. Apply power to the reader.
4. You now have 10 seconds to enter Programming mode using the
factory default Programming code 1234.
To Next Page
Loading...
Need help?
General
