Need help?Do you have a question about the Rosslare MIFARE AY-T6350 and is the answer not in the manual?
General| Type | Smartcard Reader |
|---|---|
| Model | AY-T6350 |
| Card Technology | MIFARE |
| Frequency | 13.56 MHz |
| Operating Humidity | 0 to 95% (non-condensing) |
| Ingress Protection | IP65 |
| Read Range | Up to 50 mm |
| Communication Interface | Wiegand 26-Bit |
| Output Format | Wiegand |
| Operating Voltage | 5 to 16 VDC |
| Power Supply | Linear power supply |
| Operating Temperature | -31°C to 63°C (-25°F to 145°F) |
| Material | Polycarbonate UL94 |
Lists supported transponder types for the AY-T6350, including MIFARE Ultralight and MIFARE Classic variants.
Details items included in the AY-T6350 package, such as the reader, installation kit, and manual.
Step-by-step guide for physically installing the AY-T6350 reader on a surface.
Explains how to connect the AY-T6350 reader to the access control system, including wire color functions.
Describes standby mode, card/PIN reading, and LED status during operation.
Details the reader's optical back tamper mechanism and methods for controlling the LED indicator.
Outlines the reader's programming menu hierarchy and available options.
Procedures for entering and exiting the reader's programming mode.
Lists and explains various formats for transmitting data entered via the keypad.
Lists and explains various formats for transmitting proximity card data.
Instructions for changing the reader's security programming code.
Instructions for changing the reader's facility code.
Steps to restore the reader's settings to their original factory defaults.
Procedures to follow if the reader's programming code is forgotten.
To Next Page
