Technical Specifications
AY-T6350 Installation and Programming Manual 9
2. Technical Specifications
Electrical Characteristics
Power Supply Type
Linear (recommended)
Input Voltage
8–16 VDC
Absolute Maximum Voltage
(non-operating)
18 VDC
Maximum Input Current
Standby: 180 mA, Read: 235 mA
LED Control Input
Dry Contact N.O.
Tamper Output
Open collector, active low, max. sink
current 32 mA
Max. Controller Cable Distance
150 m (500 ft)
Max. Proximity Read Range*
70 mm (2.8 in.)
Frequency
13.56 MHz
Transmission Formats
Wiegand and Clock & Data
Card Compatibility
MIFARE Classic and MIFARE Ultralight
cards
Environmental Characteristics
Operating Temp. Range
-31°C to 63°C (-25°F to 145°F)
Operating Humidity
0 to 95% (non-condensing)
Suitable for outdoor use (meets IP65)
Physical Characteristics
Height x Width x Depth
110 x 80 x 17.5 mm (4.3 x 3.2 x 0.7 in.)
Weight
170 g (6 oz)
* Measured using a Rosslare proximity card or equivalent. Range also depends
on electrical environment and proximity to metal.
To Next Page
Loading...
Need help?
General
