EasyManua.ls Logo

Rosslare MIFARE AY-T6350 - Modifying Programming Code; Modifying Facility Code

Rosslare MIFARE AY-T6350
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Keypad Programming Instructions
26 AY-T6350 Installation and Programming Manual
5.6 Changing the Programming Code
To change the Programming code:
1. Enter Programming mode.
2. Press 3 to enter Menu 3.
The LED flashes green.
3. Enter the new code you wish to set as the
Programming code.
You hear three beeps.
The system returns to Standby mode.
The Default Programming code is 1234.
The Programming code cannot be erased, meaning the code 0000
is not valid and does not erase the Programming code
5.7 Changing the Facility Code
To change the Facility code:
1. Enter Programming mode.
2. Press 4 to enter Menu 4.
The LED flashes green.
3. Enter the new 3-digit code you wish to set as the
Facility code.
You hear three beeps.
The system returns to Standby mode.
The default Facility code is 001.
Facility codes can be in the range between 000 and 255.

Related product manuals