Rosslare MIFARE AY-T6350 User Manual

Introduction
8 AY-T6350 Installation and Programming Manual
1. Introduction
The AY-T6350 is MIFARE® contactless smart card and PIN reader for
indoor and outdoor use. The unit reads the MIFARE
card serial
number (CSN) and transmits in Wiegand, Clock & Data, or Wiegand
Card + PIN formats.
In addition, the AY-T6350 comes with a backlit keypad that can be
programmed to output eight data formats. The AY-T6350 supports
MIFARE Classic and MIFARE Ultralight cards that allow multiple card
and keypad transmission formats, thus providing a high level of
compatibility and connectivity with host controllers.
1.1 Supported RFID Transponders
The AY-T6350 reads the following transponders:
 MIFARE Ultralight 512-bit EEPROM
 MIFARE Classic 1K bytes memory
 MIFARE Classic 4K bytes memory
MIFARE Ultralight 512-bit EEPROM is only partly supported; only
32 bits out of the 64 bits can be transmitted.
1.2 Box Content
Before beginning, verify that all of the following is in the box; if
anything is missing, please contact your nearest Rosslare office.
 One AY-T6350
reader
 Installation kit including:
 One drilling template (label/sticker)
 One security spline key
 One security hex screw
 Two mounting screws and wall plugs
 Installation and Programming Manual

Rosslare MIFARE AY-T6350 Specifications

General

Brand	Rosslare
Model	MIFARE AY-T6350
Category	Card Reader
Language	English