Need help?Do you have a question about the Rosslare AYC-E60B and is the answer not in the manual?
General| Read Range | Up to 8 cm (3.15 in.) |
|---|---|
| Output Formats | Wiegand 26-Bit |
| Communication Interface | Wiegand |
| Interface | Wiegand |
| Operating Temperature | -31°C to +63°C (-25°F to +145°F) |
| Operating Humidity | 0 to 95% (non-condensing) |
| Material | Polycarbonate |
| Audio/Visual Indication | Buzzer and Multicolor LED |
| Type | Proximity Card Reader |
| Temperature Range | -31°C to 63°C (-25°F to 145°F) |
| Compatibility | Compatible with standard access controllers |
| Humidity | 0 to 95% (non-condensing) |
| Humidity Range | 0% to 95% (non-condensing) |
Lists the items included in the AYC-E/Q60 product package.
Details the additional equipment required for installation and operation.
Details power supply, voltage range, and current specifications.
Covers operating temperature, humidity, dimensions, and weight.
Instructions for mounting the AYC-E60 and AYC-Q60 units.
Details wiring procedures for the unit as a reader or controller.
Describes the default operating state of the reader unit.
Covers accessing programming, transmission format selection.
Details programming code, facility code, backlight, and credential settings.
Procedures for factory reset and replacing lost programming codes.
Covers user levels, operational modes, and auxiliary input/output.
Details programming access, code changes, and various settings.
Procedures for enrolling, deleting user codes, and assigning relay codes.
Configures PIN length and procedures for lost codes.
To Next Page
