Rosslare AYC-E60B User Manual

Controller Operation
60 AYC-E/Q60 Series Installation and Programming Manual
5.9.15 Relay Codes Assignment
When a Primary code is enrolled for any user, the user is authorized to
activate the Lock Strike relay. However, different user codes may be
set to operate the auxiliary relay instead or operate both the Lock
strike and auxiliary relay. Assigning such codes is possible for any valid
user code entered in the controller. There are two methods to assign
relay codes to users: a standard method and a search method.
5.9.15.1 Relay Code Assignment using the Standard Method
To assign relay code using the Standard method:
1. Enter Programming mode.
2. Press 9 to enter Menu 9.
The left LED turns green and the right LED
turns orange.
3. Enter the 3-digit user slot for code assignment.
The left LED flashes green.
4. Enter the assignment digit for the current user slot:
 1 activates the Lock Strike relay only default
 2 activates the Auxiliary relay only
 3 activates the Lock Strike and Auxiliary relays
If the assignment code is valid, the left LED stops flashing.
The controller is now waiting for another slot number.
5. Do one of the following:
 Press # to move to the next available user slot number.
 Enter another 3-digit user slot number.
If you do not wish to continue enrolling codes, press # twice and
the controller returns to Normal mode.
Green
Orange
Green
Orange
Green

Rosslare AYC-E60B Specifications

General

Brand	Rosslare
Model	AYC-E60B
Category	Card Reader
Language	English