Rosslare AYC-E60B User Manual

Controller Operation
AYC-E/Q60 Series Installation and Programming Manual 61
5.9.15.2 Relay Code Assignment using the Search Method
To assign relay code using the Search method:
1. Enter Programming mode.
2. Press 9 to enter Menu 9.
The left LED turns green and the right LED
turns orange.
3. Enter 000 for user slot access.
The right LED flashes orange.
4. Do one of the following:
 Enter the PIN code of the Primary code
belonging to the user you want to delete.
 Present the user card of the Primary code belonging to the
user you want to delete.
The left LED flashes green.
5. Enter the assignment digit for the current user slot:
 1 activates the Lock Strike relay only default
 2 activates the Auxiliary relay only
 3 activates the Lock Strike and Auxiliary relays
If the assignment digit is valid, three beeps are heard and the
controller returns to Normal mode.
If the assignment digit is invalid, a long beep sounds and the
controller waits for another assignment digit to be entered.
Green
Orange
Green
Orange
Green
Orange
Green

Rosslare AYC-E60B Specifications

General

Brand	Rosslare
Model	AYC-E60B
Category	Card Reader
Language	English