Introduction
AYC-E/Q60 Series Installation and Programming Manual 9
1. Introduction
The AYC-E/Q60 is a series of Rosslare
go
PROX and PIN readers with
Genuine HID Technology
™
, as well as Rosslare's Convertible
technology. These units automatically determine whether to function
as a reader or as a secured standalone controller. If the unit is
connected to a standard access control unit, then it functions as a
reader. If the unit is connected to a Rosslare secured intelligent power
supply such as the PS-A25T, PS-C25T, or PS-C25TU, it functions as a
500 user secured standalone controller.
As a reader, the units can read all HID Prox cards/tags (125 kHz FSK)
using Genuine HID Technology and outputs HID Prox card data in
Wiegand according to the number of bits of data stored on the card.
The units also read Rosslare proximity cards (125 kHz) and can output
Rosslare proximity card data as Wiegand 26-Bit, Clock & Data, and
Wiegand + PIN.
As a controller, the units accept up to 500 users, and allow entry via a
personal identification number (PIN) and/or by presenting a proximity
card. The PIN code length for the controller has several options. The
PIN code length can be a set number of 4, 5, or 6 digits or it can be
flexible from 4 to 8 digits.
1.1 Box Content
Before beginning, verify that all of the following is in the box. If
anything is missing, please report the discrepancy to your nearest
Rosslare office.
One AYC-E/Q60 unit
Installation kit
Installation and operating instructions
To Next Page
Loading...
Need help?
General
