Reader Functionality
AYC-Fx4 and AYC-Gx4 family manual Page 25
• The Transmit LED will turn
red.
3) Enter the new 4 digit code you wish
to set as the Programming Code
4) System returns to Transmit Mode
• You will hear three beeps
• The Program LED will turn off
• The Transmit LED will turn red
• Programming Code cannot be erased, i.e. the code 0000 is
invalid and will not erase the Programming Code.
•
The factory default 4-digit Programming Code is 1234.
5.2.4. Changing the Facility
Code
1) Enter Programming Mode.
2) Press “4” to enter Menu 4.
• The Transmit LED will turn
red.
3) Enter the new 3-digit code you wish
to set as the Facility Code
4) System returns to Transmit Mode
• You will hear three beeps
• The Program LED will turn off
• The Transmit LED will turn red
• Facility Code can be in the range of 000 to 255.
• The default Facility Code is 0.
To Next Page
Loading...
Need help?
General
