Controller Functionality
56 AYC-x6355 Installation and User Manual
8.9.14.1 Deleting Primary & Secondary Codes using Standard
Method
1. Enter Programming mode.
2. Press 8 to enter Menu 8.
The Mode LED turns red and the
Door LED turns orange.
3. Enter the 3-digit user slot code
you wish to delete.
The Mode LED flashes red
indicating the controller is waiting
for the Programming code to
confirm the deletion.
If the user slot is empty, you hear
a long beep and the unit returns
to Normal mode.
4. Enter your programming code to
confirm the deletion.
If the programming code is valid, three beeps are heard and the
controller returns to Normal mode.
If the programming code is invalid, a long beep is heard and the
controller returns to Normal mode.
It is recommended that a record be kept of added and deleted
users so that it is easier to keep track of which user slots are
empty and which user slots are not.
8.9.14.2 Deleting Primary & Secondary Codes using Search
Method
1. Enter Programming mode.
To Next Page
Loading...
Need help?
General
