A4US
US
A4
US A4
US
A4
A4 US
US
A4
US
A4
A4 US
Table of Contents
1 Introduction 4
2 Safety 5
2.1 Standards and Directives 5
2.2 Competency 5
2.3 Commissioning 5
2.4 Warnings 5
3 Transport and Storage 6
4 Actuator Identification 7
4.1 CK Standard 7
4.2 CKA Atronik 8
4.3 CKc Centronik 9
5 Preparing the Drive Bush 10
5.1 Drive Bush - Type A Coupling: 10
5.1.1 Disassembly of bearing assembly 10
5.1.2 Reassembly of bearing assembly 10
5.2 Drive Bush - Type B Coupling: 11
5.2.1 Disassembly 11
5.2.2 Reassembly 11
6 Mounting the Actuator 12
6.1 Weights and Measures 12
6.2 Mounting the Actuator - Rising Stem Valves 13
6.2.1 Fitting the actuator and base
as a combined unit - all sizes 13
6.2.2 Fitting thrust base to valve - all sizes 13
6.3 Mounting the Actuator -
Non Rising Stem Valves - Top Mounted 13
6.4 Mounting the Actuator -
Valve with Gearbox - Side Mounted 13
6.5 Actuator Sealing 13
7 Cable Connections 14
7.1 Terminal block layout 14
7.2 Earth/Ground Connections 15
7.3 Removing the plug and socket 15
7.4 Cable entry 15
8 Operating Your Actuator 15
8.1 Operating by Hand 15
8.2 Operating Electrically 15
9 Commissioning 16
9.1 Atronik Interface 16
9.2 Centronik Interface 17
9.3 Centronik Navigation 18
9.3.1 Local Selector input 18
9.3.2 Setting Tool Input 18
9.4 Centronik Feedback 19
9.4.1 Arrow Identification 19
9.4.2 Confirmation Feedback 19
9.4.3 Torque/Limit Setting 19
9.5 Basic Mechanical Switch Mechanism Setting 20
9.5.1 Instructions 20
9.5.2 Set Position Limits 21
9.6 End of Travel Action 23
9.6.1 Atronik 23
9.6.2 DIP switch functions 23
9.6.3 Centronik 24
9.7 Digital Switch Mechanism Setting 25
9.7.1 Entering Configuration mode 25
9.7.2 Entering the User Password 25
9.7.3 Menu Navigation 26
9.8 Secondary Function Setting 28
10 Maintenance, Monitoring and Troubleshooting 28
11 Disposal / Recycling 29
12 Environmental 29
13 Components of The Modular CK Actuator Design 30
Keeping the World Flowing
3
To Next Page
Loading...
Need help?
General
