ROXELL - 031 - 0516
FLEX-AUGER - INSTALLATION INSTRUCTIONS
III-27
If there are more than 2 supply Flex-Augers: install the extension for modular control unit on
the standard unit for modular control unit.
Fix the control unit to the 4 suspension eyes.
Fix the power unit. Suspend each power unit separately
.
cessories from the Flex-
Auger hardware kit
There is a common safety switch for all motors.
Flex-Auger
Motor
FIGURE 37.
TO INSTALL THE MULTIPLE CONTROL UNIT
04904736-FA55
04904744-FA75
04904751-FA90
04904759-FA125
To Next Page
Loading...
